The Dry-Crimp wire connector is a two-part system that allows installers to first crimp wire and test for conductivity, and then secure with a waterproof housing. There are two crimp sizes available to cover a wire range between #18 and #10 AWG, and the waterproof housing is filled with a dielectric silicone sealant to ensure a waterproof and corrosion proof splice. The three holes in the housing tightly seal around wires (or seal when no third wire is used) to ensure continuous splice protection.
The Probe is ideal when down-lighting is challenged by a small installation area. Featuring a lock and load shroud, the Probe is enhanced by a revolutionary ball and joint swivel mount allowing a 360° rotation, thus giving 100% accuracy when dialing in the proper lighting angle. The petite die cast brass body is designed to house a FLEX GOLD™ Series MR16 LED lamp.
Body
Precision machined from solid brass casting. Body design provides enclosed, water resistant wireway to protect wires. Gasket
High temperature silicone o-ring for water-tight seal. Knuckle
Machined brass, exclusive ball and joint. The 360° Orbital Mount™ allows for perfect directional fine tuning. Shroud
Precision machined and comes with a factory sealed shock resistant tempered glass lens to prevent water intrusion. Accepts up to one additional lens/hex cell accessory. Lens
Comes with a complete set of optical designer lenses including; spread lens, frosted, hex cell and blue lens for moonlighting effect. Lamp
For use with a MR16 lamp.
Electrical Requirements
A remote 12V or 24V transformer required, may be ordered separately from Unique Lighting Systems®. Voltage range for 12V halogen lamps is 10.8V to 12V. Voltage range for 24V halogen lamps is 21.6V to 24V. Lamp Connection
Specification grade, beryllium copper lamp holder. GU5.3 base. Wiring
Exclusive UF Intelli-Flex wire with anti-moisture migration connections. Mounting Hardware
Cast brass sphere base included.
Finish
Exclusive weathered brass finish is standard. Unique™ Lightings’ weathered brass finish is a “living finish” and will naturally patina and change over time. Polyester powder coat finishes are also available.
Warranty
The Odyssey Family of products from Unique Lighting Systems® carries a Limited Lifetime Warranty against manufacturer’s defects. Manufacturing
Manufactured to ISO 9001-2008 Quality Systems Standard View/Download Printable Product Spec Sheet pdf
The Vanguard is a step beyond the normal recessed wall light. Perfect to illuminate short retaining walls and other niche locations. The Vanguard cover directs and spreads light to the intended area. The extendable mounting plate securesthe fixture while still allowing face plate adjustments. The frosted lens is perfect for the desired light output.
Materials
Crafted from brass or copper. Body
Precision formed brass or copper. Collar
Machined brass. Lens
Shock resistant, frosted lens. Lamp
For use with 20W max. Astro-Brite lamp. FLEX™ Series LED lamps are available in 1W or 2W T3 lamps. LED lamps are available in 3000K color temperatures.
Electrical Requirements
A remote 12V or 24V transformer required, may be ordered separately from Unique Lighting Systems®. Voltage range for 12V halogen lamps is 10.8V to 12V. Voltage range for 24V halogen lamps is 21.6V to 24V. Voltage range for 12V FLEX™ Series LED lamps is 10V-18V. Socket
Specification grade, beryllium copper lamp holder. GU5.3 base. Wiring
Exclusive UF Intelli-Flex wire with anti-moisture migration connections. Mounting Hardware
Mounting plate and extension brackets.
Finish
Exclusive Weathered Brass. Unique™ Lightings’ Weathered Brass and Natural Copper finish is a “living finish” and will naturally patina and change over time. Polyester powder coat finishes are also available.
Warranty
The Signature Series™ Family of products from Unique Lighting Systems® carries a limited lifetime warranty against manufacturer’s defects. Manufacturing
Manufactured to ISO 9001-2008 Quality Systems Standard.
The Voyager 8 is perfect to illuminate stairs, benches, short retaining walls and other niche locations. The Voyager 8 can be ordered with a louvered, open or hooded faceplate to direct and spread light to the intended area.
Materials
Crafted from cast brass and PBT injection molded housing. Body
Fully cast brass faceplate. PBT injection molded housing. Faceplate
Fully cast brass. Three options; louvered, hood and open face. Lens
Shock resistant, frosted or clear, depending on faceplate option. Lamp
For use with 20W max. Astro-Brite lamp. FLEX™ Series LED lamps are available in 1W or 2W T3 lamps. LED lamps are available in 3000K color temperatures.
Electrical Requirements
A remote 12V or 24V transformer required, may be ordered separately from Unique Lighting Systems®. Voltage range for 12V halogen lamps is 10.8V to 12V. Voltage range for 24V halogen lamps is 21.6V to 24V. Voltage range for 12V FLEX™ Series LED lamps is 10V-18V. Socket
Specification grade, beryllium copper lamp holder. GU5.3 base. Wiring
Exclusive UF Intelli-Flex wire with anti-moisture migration connections. Mounting Hardware
Mounting screws and anchors with foam leveling gasket.
Finish
Exclusive Weathered Brass finish is standard. Unique™ Lightings’ Weathered Brass finish is a “living finish” and will naturally patina and change over time. Polyester powder coat finishes are also available.
Warranty
The Odyssey Family of products from Unique Lighting Systems® carries a Limited Lifetime Warranty against manufacturer’s defects. Manufacturing
Manufactured to ISO 9001-2008 Quality Systems Standard.
A miniature version of the Starburst, the Stellar mini wall washer is a powerful fixture. Featuring a small die cast brass body, this undersized power house is able to illuminate planter areas, short retaining walls, step landings or any other area needing a soft glow. Advance applications include under eaves or second story level lighting*.
*(Round Mounting Base needed when installing the Stellar on a surface mount application.)
Body
Precision machined from solid brass casting. Body design provides enclosed, water resistant wireway to protect wires. Features an integral knuckle for maximum mechanical strength. Gasket
High temperature silicone gasket for water-tight seal. Knuckle
Machined brass knuckle with a solid brass adjustable thumb screw. Vertical tilt of 270° and horizontal rotation of 360° for easy aiming. The Orbital Lock Nut™ allows for locking the horizontal rotation without adjusting the stake. Shroud
Precision machined and comes with a factory sealed shock resistant tempered glass lens to prevent water intrusion. Includes external injection molded hex louver. Accepts up to one additional lens. Lens
Comes with a complete set of optical designer lenses including: spread lens, frosted. Lamp
For use with 20W max. Astro-Brite lamp. FLEX™ Series LED lamps are available in 1W and 2W T3. LED lamps are available in 3000K color temperatures.
Electrical Requirements
A remote 12V or 24V transformer required, may be ordered separately from Unique Lighting Systems®. Voltage range for 12V halogen lamps is 10.8V to 12V. Voltage range for 24V halogen lamps is 21.6V to 24V. Voltage range for FLEX™ Series LED T3 lamps is 10V-18V. Lamp Connection
Specification grade, beryllium copper lamp holder. GU5.3 base. Wiring
Exclusive UF Intelli-Flex wire with anti-moisture migration connections. Mounting Stake
Standard mounting stake is injection molded PVC with a ½” NPS threaded female fitting.
Finish
Exclusive Weathered Brass finish is standard. Unique™ Lightings’ weathered brass finish is a “living finish” and will naturally patina and change over time. Polyester powder coat finishes are also available.
Warranty
The Odyssey Family of products from Unique Lighting Systems® carries a Limited Lifetime Warranty against manufacturer’s defects. Manufacturing
Manufactured to ISO 9001-2008 Quality Systems Standard.
Capable of the most versatile installation applications, the Starburst functions as both a directional up-light or a wall washer fixture. This fixture features an unprecedented dual socket mount system allowing you to install a vertical MR16 for directional up-lighting or a horizontal Astro-Brite lamp for wall washing is necessary. Both lamps are included with every Starburst for maximum design adaptability.
Body
Precision machined from solid brass casting. Body design provides enclosed, water resistant wireway to protect wires. Features an integral knuckle for maximum mechanical strength. Gasket
High temperature silicone gasket for water-tight seal. Knuckle
Machined brass knuckle with a solid brass adjustable thumb screw. Vertical tilt of 270° and horizontal rotation of 360° for easy aiming. The Orbital Lock Nut™ allows for locking the horizontal rotation without adjusting the stake. Shroud
Precision machined and comes with a shock resistant tempered glass lens to prevent water intrusion. Includes external hex louver. Lens
Comes with a complete set of optical designer lenses including: spread lens, dimpled and frosted. Lamp
For use with a halogen lamp up to 35W MR16 lamp or 35W Astro-Brite lamps. FLEX™ Series LED lamps are available in 3W, 4W, 5W or 6W MR16. LED lamps are available in 2700K and 3000K color temperatures.
Electrical Requirements
A remote 12V or 24V transformer required, may be ordered separately from Unique Lighting Systems®. Voltage range for 12V halogen lamps is 10.8V to 12V. Voltage range for 24V halogen lamps is 21.6V to 24V. Voltage range for FLEX™ Series LED MR16 lamps is 10V-18V. Lamp Connection
Specification grade, beryllium copper lamp holder. GU5.3 base. Wiring
Exclusive UF Intelli-Flex wire with anti-moisture migration connections. Mounting Stake
Standard mounting stake is injection molded PVC with a ½" NPS threaded female fitting. Finish
Exclusive weathered brass finish is standard. Unique™ Lightings' weathered brass finish is a "living finish" and will naturally patina and change over time. Polyester powder coat finishes are also available.
Warranty
The Odyssey Family of products from Unique Lighting Systems® carries a limited lifetime warranty against manufacturer's defects. Manufacturing
Manufactured to ISO 9001-2008 Quality Systems Standard
One of the most resourceful fixtures in the Odyssey line the Pulsar offers style and function without compromise. Its sleek straight lines, lock and load shroud feature and accessories make the Pulsar an essential fixture when lighting queen palms, trees, columns or any other tall structure.
Body
Precision machined from solid brass casting. Body design provides enclosed, water resistant wireway to protect wires. Features an integral knuckle for maximum mechanical strength. Gasket
High temperature silicone o-ring for water-tight seal. Knuckle
Machined brass knuckle with a solid brass adjustable thumb screw. Vertical tilt of 270° and horizontal rotation of 360° for easy aiming. The Orbital Lock Nut™ allows for locking the horizontal rotation without adjusting the stake. Shroud
Precision machined and comes with a factory sealed shock resistant glass lens to prevent water intrusion. Accepts up to one additional lens/hex cell accessory. Lens
Comes with a complete set of optical designer lenses including: spread lens, frosted, hex cell. Lamp
For use with a halogen lamp up to 35W MR16 lamp. FLEX™ Series LED lamps are available in 3W, 4W, 5W or 6W MR16. LED lamps are available in 2700K and 3000K color temperatures.
Finish
Exclusive Weathered Brass finish is standard. Unique™ Lightings’ Weathered Brass finish is a “living finish” and will naturally patina and change over time. Polyester powder coat finishes are also available.
Electrical Requirements
A remote 12V or 24V transformer required, may be ordered separately from Unique Lighting Systems®. Voltage range for 12V halogen lamps is 10.8V to 12V. Voltage range for 24V halogen lamps is 21.6V to 24V. Voltage range for FLEX™ Series LED MR16 lamps is 10V-18V. Lamp Connection
Specification grade, beryllium copper lamp holder. GU5.3 base. Wiring
Exclusive UF Intelli-Flex wire with anti-moisture migration connections. Mounting Stake
Standard mounting stake is injection molded PVC with a ½” NPS threaded female fitting.
Warranty
The Odyssey Family of products from Unique Lighting Systems® carries a Limited Lifetime Warranty against manufacturer’s defects. Manufacturing
Manufactured to ISO 9001-2008 Quality Systems Standard.
A smaller version of the Pulsar, the Probe is ideal when up-lighting is challenged by a small installation area. Featuring a lock and load shroud the Probe is enhanced by a revolutionary ball and joint swivel mount allowing a 360° rotation. The petite die cast brass body houses a MR16 20 Watt Halogen bulb.
Body
Precision machined from solid brass casting. Body design provides enclosed, water resistant wireway to protect wires. Gasket
High temperature silicone o-ring for water-tight seal. Knuckle
Machined brass, exclusive ball and joint. The 360° Orbital Mount™ allows for perfect directional fine tuning. Shroud
Precision machined and comes with a factory sealed shock resistant tempered glass lens to prevent water intrusion. Accepts up to one additional lens/hex cell accessory. Lens
Comes with a complete set of optical designer lenses including: spread lens, frosted, hex cell. Lamp
For use with a halogen lamp up to 35W MR16 lamp. FLEX™ Series LED lamps are available in 3W, 4W, 5W or 6W MR16. LED lamps are available in 2700K and 3000K color temperatures.
Electrical Requirements
A remote 12V or 24V transformer required, may be ordered separately from Unique Lighting Systems®. Voltage range for 12V halogen lamps is 10.8V to 12V. Voltage range for 24V halogen lamps is 21.6V to 24V. Voltage range for FLEX™ Series LED MR16 lamps is 10V-18V. Lamp Connection
Specification grade, beryllium copper lamp holder. GU5.3 base. Wiring
Exclusive UF Intelli-Flex wire with anti-moisture migration connections. Mounting Stake
Standard mounting stake is injection molded PVC with a ½” NPS threaded female fitting.
Finish
Exclusive Weathered Brass finish is standard. Unique™ Lightings’ Weathered Brass finish is a “living finish” and will naturally patina and change over time. Polyester powder coat finishes are also available.
Warranty
The Odyssey Family of products from Unique Lighting Systems® carries a Limited Lifetime Warranty against manufacturer’s defects. Manufacturing
Manufactured to ISO 9001-2008 Quality Systems Standard.
Petite in design, yet powerful, the Mercury 4 offers discrete solutions to challenging installation areas. The frosted cylindrical lens minimizes glare while the 20 Watt Astro-Brite lamp provides sufficient light to cast soft glows on any path or walking area. Ideal for walkways, the Mercury 4 is also perfect for small planter areas in need of light. The adjustable three-tier settings give maximum design flexibility by creating 3 different beam spreads with one fixture.
Materials
Crafted from extruded brass. Stem
Brass unibody design provides enclosed, water resistant wireway. Collar
Extruded brass with brass height adjustment thumb screw. Shroud
Stamped brass. Reflective Powder Coat Interior. Lens
Shock resistant, frosted Borosilicate Glass lens. Lamp
For use with a Xelogen lamp up to 20W. FLEX™ Series LED lamps are available in 1W or 2W T3 lamps. LED lamps are available in 3000K color temperatures.
Electrical Requirements
A remote 12V or 24V transformer required, may be ordered separately from Unique Lighting Systems®. Voltage range for 12V halogen lamps is 10.8V to 12V. Voltage range for 24V halogen lamps is 21.6V to 24V. Voltage range for 12V FLEX™ Series LED lamps is 10V-18V. Socket
Specification grade, beryllium copper lamp holder. GU5.3 base. Wiring
Exclusive UF Intelli-Flex wire with anti-moisture migration connections. Mounting Stake
Standard mounting stake is injection molded PVC with a ½” NPS threaded female fitting.
Finish
Exclusive Weathered Brass finish is standard. Unique™ Lightings’ Weathered Brass finish is a “living finish” and will naturally patina and change over time. Polyester powder coat finishes are also available.
Warranty
The Odyssey Family of products from Unique Lighting Systems® carries a Limited Lifetime Warranty against manufacturer’s defects. Manufacturing
Manufactured to ISO 9001-2008 Quality Systems Standard.